2025 Gehl Track Loaders VT320

Information

2025 Gehl Track Loaders VT320

Track Loaders

Are you going up against the most difficult challenges on farms and construction sites and need unmatched performance, strength, and durability? Then you need the VT320, our largest vertical lift Track Loader. A machine that’s tougher than any job you can throw at it, the VT320 features an 85 kW engine and 3,200 lbs. of rated operating capacity for powerful lift and torque. That means rough terrain and unpredictable environments won't stop you while you're lifting, loading, and unloading heavy-duty materials from point A to B. Engineered for superior serviceability, productivity, and comfort, this machine gives you the edge over whatever is coming your way on the job site while leaving you prepared for tomorrow. The VT320—it's the pinnacle of Track Loaders.

Photos

Highlights

  • Hensall, Ontario
  • 2025
  • Gehl
  • Track Loaders VT320
  • Model: TD 3.6 EPA
  • Available
  • Track Shoe: 450 mm | Bucket: 2131 mm
  • Dump angle at full height: 41 ° | Dump Fully Raised: 2530 mm | Specified: 1938 mm | Reach at Specified: 751 mm

Specifications

  • 2025
  • Gehl
  • Track Loaders
  • VT320
  • General
  • Model: TD 3.6 EPA
  • Deutz
  • 85 kW | I.C. rating: 114 hp
  • 3.60 l
  • 2300 rpm
  • 4
  • Axial Piston with planetary gear box reduction
  • 12 V
  • Alternator: 14 V / 120 A | Cold Cranking Amps at Temperature (CCA): 1600 A
  • Ground Speed Single Speed: 8.60 km/h | Drawbar Pull/Tractive Effort: 5792 kg Bucket Breakout Tilt Cylinder: 4492 kg | Bucket Breakout Lift Cylinder: 3398 kg
  • Standard Auxiliary: 110 l/min
  • Reach - Fully Raised: 1026 mm | Maximum Rollback Angle Fully Raised: 90.30 ° | Carry Position: 199 mm | Maximum Rollback Angle at Carry Position: 31 ° | Digging Position: 19 mm | Angle of Departure with STD Counterweight: 23.50 ° | Track gauge: 1313 mm | Crawler base: 1570 mm | Clearance Radius Front with Bucket: 2489 mm
  • with bucket: 4059 mm | without Bucket: 3243 mm
  • less bucket: 1766 mm
  • Operating Fully Raised: 4298 mm | to Hinge Pin Fully Raised: 3302 mm | to top of ROPS: 2111 mm
  • Dump angle at full height: 41 ° | Dump Fully Raised: 2530 mm | Specified: 1938 mm | Reach at Specified: 751 mm
  • Track Shoe: 450 mm | Bucket: 2131 mm
  • 309 mm
  • tank: 37.60 l
  • tank: 121.10 l
  • Operating at 35% Tipping Load: 1452 kg / At 50% Tipping Load: 2074 kg | Tipping: 4148 kg
  • Operating: 5352 kg
  • Track Type: Rubber | Roller Type: Steel