2025 Gehl Construction Telehandlers TH10-55

Information

2025 Gehl Construction Telehandlers TH10-55

Construction telehandlers

When it comes to material handling at construction sites for apartments or condominiums, you need stability, reach, and power—and the TH10-55 has it all. Offering 10,000 lbs. of lifting capacity with a long boom, this Telescopic Handler can stage pallets of bricks and bulky loads of lumber multiple stories up with its 55 feet of reach. You'll save time on busy workdays with its upgraded stabilization system, which allows for movement at all boom levels to facilitate aligning of material positioning. Plus, its automatic transmission and parking brake make for a seamless operator experience, even in rough terrain and difficult conditions. Job-tested and built for hard work, it's time to take a load off your shoulders and let the TH10-55 do the heavy lifting.

Photos

Highlights

  • Hensall, Ontario
  • 2025
  • Gehl
  • Construction Telehandlers TH10-55
  • model: TCD 3.6 L4
  • Type: Powershift | Torque converter with powershift gearbox | Axle Manufacturer: Dana
  • Available
  • 127 mm
  • Max. lifting: 16.95 m

Specifications

  • 2025
  • Gehl
  • Construction Telehandlers
  • TH10-55
  • General
  • model: TCD 3.6 L4
  • Deutz
  • norm: Tier 4 final
  • I.C. rating: 127 hp / 95 kW
  • 2300 rpm
  • 500 Nm
  • 3600 cm³
  • 4
  • Type: Powershift | Torque converter with powershift gearbox | Axle Manufacturer: Dana
  • Number (forward / reverse): 5 / 3
  • wheels (front / rear): 2 / 2
  • Hydraulic spring release SAHR | Service: Wet disc brakes
  • Drive (front / rear): 2 / 2 | Tires Type: Pneumatic
  • Max. travel: 32 km/h / (laden): 31.54 km/h
  • Lifting: 16 s | Lowering: 11 s | Extension: 18 s | Retraction: 16 s | Crowd: 4 s | Dump: 6 s
  • Axial piston
  • 151 l/min
  • 275.80 bar
  • Noise at driving position (LpA): 80 dB
  • Max. outreach: 12.88 m | Tilt-up angle: 34 ° | Tilt-down angle: 96 ° | External turning radius: 3.88 m | Frame leveling longitudinal: +/- 10 ° | Frame leveling corrector: 10 ° | section: 50.80 mm
  • 3.50 m
  • to carriage: 6.40 m | (with forks): 7.62 m
  • 2.54 m | cab: 0.95 m
  • 2.59 m
  • Max. lifting: 16.95 m
  • 127 mm
  • to face of forks: 5.82 m | Forks length: 1219 mm
  • 0.48 mm
  • Engine oil: 8.51 l
  • Hydraulic oil: 159 l
  • Diesel Exhaust fluid: 15.14 l | Tank: 144 l
  • Max: 4535.92 kg
  • Unladen (with forks): 10660 kg | Overall: 13744 kg
  • Controls: Joystick