2025 Gehl Construction Telehandlers RS 5-19 GEN:3

Information

2025 Gehl Construction Telehandlers RS 5-19 GEN:3

Construction telehandlers

When you need to get heavy loads up high on the construction site, look no further than the RS5-19. Featuring 5,500 lbs. of lifting capacity and 19' of reach, this powerful (yet compact) machine gets the job done right. Working hard in the tightest spaces, it packs the power you'd expect from a full-sized machine in a concentrated package. Plus, the RS5-19 is informed by decades of operator feedback to safely navigate difficult terrain and challenging conditions with confidence. Because with a job as difficult, dirty, and tough as yours, you need an efficient machine that's both safe and comfortable—letting hard work thrive during the day so you can return home every night.

Photos

Highlights

  • Hensall, Ontario
  • 2025
  • Gehl
  • Construction Telehandlers RS 5-19 GEN:3
  • model: 4TNV98C
  • Hydrostatic | Axle Manufacturer: Dana
  • Available
  • Max. lifting: 5.82 m

Specifications

  • 2025
  • Gehl
  • Construction Telehandlers
  • RS 5-19 GEN:3
  • General
  • model: 4TNV98C
  • Yanmar
  • norm: Tier 4 final
  • I.C. rating: 69 Hp / 50.10 kW
  • 1625 rpm
  • 235 Nm
  • Hydrostatic | Axle Manufacturer: Dana
  • Number (forward / reverse): 2 / 2
  • (front / rear): 2 / 2
  • Hydraulic spring release SAHR | Service Wet disc brakes
  • Drive (front / rear): 2 / 2
  • Max. travel: 24 km/h
  • Lifting: 8 s | Lowering: 5 s | Extension: 7 s | Retraction 6 s
  • Gear pump
  • 83.28 l/min
  • 231 bar
  • Max. outreach: 3.35 m | Tilt-up angle: 12 ° | Tilt-down angle: 100 ° | External turning radius: 3.35 m
  • 2.29 m
  • 1.80 m | cab: 711 mm
  • 1.93 m
  • Max. lifting: 5.82 m
  • to face of forks: 3.76 m
  • 266 mm
  • Engine oil: 9 l | Hydraulic oil 68.14 l
  • tank: 64.35 l
  • Max: 2494.76 kg
  • Unladen (with forks): 4427 kg | Overall: 4535.92 kg
  • Safety cab homologation: ROPS/FOPS | Controls: Single Joystick FNR